null content_copy
Sale

Yorkville M810-2 10+2 Channel Stereo Powered Mixer With Digital Effects

SKU:
54621
|
UPC:
840402024040
Availability:
In Stock
$1,379.00 $989.00
$1,249.00
(You save $260.00 )
(No reviews yet) Write a Review

The convenience, lighter weight and small "footprint" of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new "wedge" mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP and a new, more effective master EQ section and ten very useful and usable input channels complete the new "wedge" mixer packages. The 800-watt Yorkville M810 has two integrated 400-watt power amplifiers that can be assigned as stereo mains, or mono main and mono monitor. Each amplifier is attached to an innovative master EQ section designed specifically for these new mixers. The master EQ has a 9-band graphic EQ with additional high and low shelving EQs at either end of the frequency band. The nine graphic sliders are essentially all of the middle bands of a 15-band graphic EQ with the low and high frequency bands covered by separate shelving controls. This gives the user more control over the feedback-prone mid frequency bands; with high and low tone-shaping frequencies controlled by additional simple +/- 15 dB trim controls. The Yorkville M810 has 10 input channels. The first six channels have balanced XLR microphone and TRS balanced inputs, input trim control, three-band EQ, master volume and trim set light. The mono line inputs on channels 5 and 6 are pre-EQ'd for Hi-Z instrument level input, making them an ideal place to start when looking for that perfect live acoustic guitar or direct bass sound. When the input trim level is properly set, users will have ample overall gain while taking full advantage of the new clip elimination circuit which makes it virtually impossible to distort the input of the microphone and instrument channels. In addition to the 6 mono microphone channels, the M810 has two discrete stereo input channels (channel 7 & 8, 9 & 10) each with three-band EQ and stereo TRS balanced inputs. Both stereo channels have an additional XLR balanced microphone input, making for a total of 8 potential microphone inputs, or 6 mono microphone inputs and two stereo line inputs.

Features Of The Yorkville M810 Mixer

  • Number of Channels: 10
  • Mono Channel EQ: Low, Mid, High
  • Stereo Channel EQ: Low, Mid, High
  • Channel Effects: All Channels
  • Monitors Effects: Yes
  • Balance Controls: Ch. 7 - 10
  • Pan Controls: Ch. 1 - 6
  • Channel Overload Protection: Ch. 1 - 6
  • Inputs: XLR (bal) 8
  • Inputs: 1/4" 10
  • Inputs: RCA (unbal) 1 Pair
  • Mute Switches: Global 1 - 8
  • Activity / Solo LED: Trim Set Ch. 1 - 6
  • Clip/Mute LED: All Channels
  • Phantom Power: 48V with LED Indicator
  • Internal Effects: Digital 16 Bit; 255 Effects
  • Auxiliary Sends Effect: Monitor
  • Effects Send: Yes
  • Effects Return: Internal
  • Effects Return to Main: Yes
  • Effects Return to Monitor: Yes
  • Reverb / Effects Footswitch: Yes
  • Record Outputs: Stereo RCA Pair
  • Max Gain to Line Out: Mic Input (dB) +84
  • Max Gain to Line Out: Line Input (dB) +82
  • Master EQ -1 (type /Channels /Range - dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving
  • Monitor EQ -1 (type /Channels /Range - dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving
  • Main Outputs ( Line Level) 2 x 1/4inch TRS
  • Main Amp Inputs (Line Level) 2 x 1/4inch TRS
  • Monitor Outputs (Line Level) 1 x 1/4inch TRS
  • Outputs - Amp A: 1/4" Jacks 2
  • Outputs - Amp A: Speakon 4-pin 1
  • Outputs - Amp B: 1/4" Jacks 2
  • Outputs - Amp B: Speakon 4-pin 1
  • Mixer: Signal to Noise Ratio (dB) 105
  • Mixer: Frequency Response (Tone and EQ Flat,+/-2dB) 20 - 20,000
  • Mixer: Input Referred Noise to line out, @ 150 Ohms (dBv) -119
  • Mixer THD (Main out w/ -10dB input) 0.01%
  • Amp A: Power Output @ 8 Ohms (0%1"THD, 1kHz): 250
  • Amp A: Power Output @ 4 Ohms: 400
  • Amp A: Power Output -other: 400 @ 2 ohms
  • Amp B: Power Output @ 8 Ohms (0%1"THD, 1kHz): 250
  • Amp B: Power Output @ 4 Ohms: 400
  • Amp B: Power Output -other: 400 @ 2 ohms
  • THD: 1kHz (dB) 0.1%
  • THD: 20Hz-20kHz (dB) 0.5%
  • Hum and Noise (un / Aweight -dB): -101 / -107
  • Typical crosstalk -1 kHz (dB): better than -60db
  • Input Impedance - Bal/Unbal (Ohms): 20k / 10k ohms
  • Input Sesitivity (Vrms Sine): 1.4
  • Max Votage Gain: (dB) 29
  • Power Consumption (typ/max): 4.2A @ 60Hz / 2.2A @ 50Hz
  • Protection: Thermal, Short Circuit, Impedance Overload
  • Cooling: 2 x 80mm Fans
  • Transformer Type: Toroidial
  • Finish: Grey and Black Powder Coat
  • Chassis Construction: Steel and Aluminum
  • Rackmount: Yes (Kit Available)
  • Other Features: Tiltback or Upright Wedge Angles
  • Dimensions (DWH, inches) 11.1 x 18.6 x 11
  • Weight: 27 lbs