|
 The Intelix MARC Room Combine System is designed specifically for applications with moveable walls, including hotels, convention centers, conference centers, houses of worship, and multi-use facilities. MARC allows you to design, program, and install your sophisticated room combine system in a fraction of the time it would take with other solutions.
Room Combine System Checklist
To get started with designing your Intelix MARC Room Combine system, you need to specifiy the following information:
Specify the MARC Matrix Mixer
- Determine the required amount of audio inputs and outputs. Keep in mind that stereo sources/destinations populate two inputs/outputs.
- Round the number of the audio inputs to the nearest derivative of eight and place them within Intelix's part numbering system.
Specify Control
- Determine if wall state changes are automatic or manual.
- If automatic, specify Wall Sensors, Wall Status Panels, and a Comet 8-RJ12.
- If manual, specify a Room Combine Panel, software, or an RS232 controller.
- Determine if in-room remote control is required.
- If required, specify Intelix RCS room control stations, individual Comet remotes, or RS232 controllers.
- If ordering custom RCS remotes (RCS-Custom), specify button labeling.
- If ordering individual Comet remotes, specify model and mounting type.
- Specify one Comet power supply (Comet PS) per 12 individual Comet remotes or 4 RCS room control stations.
- Determine if logic control is required.
- If required, specify one PCMCIA Logic I/O Card.
Specify Enhancement Components
- Determine if audio preamplification or phantom power is required.
- If required, specify one Mic/Line Card for every eight channels.
- To simplify wiring, Intelix recommends Comet-BA4 and Comet-BA11 bridge adaptors.
Regardless of how you assemble your purchase order, remember that each system sale is personally handled by an Intelix Application Engineer who ensures your MARC order is complete and correct.
|
