Product Information

Audio-Technicas advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver.

While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/1/4" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

  • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
  • 1321 selectable UHF channels with automatic frequency scanning
  • Up to 16 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • LCD information display offers step-through menus for setting preferences
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when transmitter is turned off
  • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix & less feedback
  • Use any number of Stereo Receivers (with individual mixes) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
  • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

M3 Components

  • EP3 Headphones
  • In-ear dynamic headphones offer high-fidelity sound and excellent isolation
  • M3T Stereo Transmitter
  • Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
  • M3R Stereo Receiver
  • Personal Mix Control in a lightweight body-pack with backlit LCD display

OVERALL SYSTEM SPECIFICATIONS

  • Operating Frequencies:-Band L: 575.000 to 608.000 MHz, 1321 frequencies-Band M: 614.000 to 647.000 MHz, 1321 frequencies
  • Minimum Frequency Step: 25 kHz
  • Modulation Mode: FM stereo
  • Maximum Deviation: -+40 kHz
  • Dynamic Range: 90 dB (typical), A-weighted
  • Total Harmonic Distortion: <1% at (1 kHz, ±20 kHz Deviation)
  • Operating Range: 100 m (300'), typical (Open range environment with no interfering signals.)
  • Frequency Response: 60 Hz to 13 kHz (+/- 3 dB)
  • Simultaneous Use: 16 channels per band (maximum recommended)
  • For assistance with multi-band operation or other frequency coordination issues, please contact you regional Audio-Technica customer service representative.

RECEIVER SPECIFICATIONS

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphone Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions 70.0 mm (2.76") W x 25.0 mm (0.98") D x 110.0 mm (4.33") H
  • Net Weight 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

TRANSMITTER SPECIFICATIONS

  • RF Power Output: 10 mW/50 mW (switchable), 50 ohms limited to 10 mW within 863 MHz to 865 MHz Following national regulations
  • Spurious Emissions: Following federal and national regulations
  • Input Connections: XLRF-type/6.3 mm stereo (1/4") combination connector-Pin 1 and Sleeve: Ground-Pin 2 and Tip: Hot-Pin 3 and Ring: Cold
  • Maximum Input Level, XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu, 6.3 mm (1/4") mono, unbalanced: +26 dBu
  • Loop Output Connector: XLRM-type connector-Pin 1: Ground-Pin 2: Hot-Pin 3: Cold
  • Power Requirement: 12-18V DC, 600 mA
  • Headphone Output Connector: 6.3 mm (1/4") TRS stereo phone jack
  • Headphone Output Power: 120 mW at 32 ohms
  • Antenna Connector: BNC, 50 ohms
  • Dimensions: 210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H
  • Net Weight: 930 g (32.8 oz), without accessories
  • Accessories Included: AC adapter (country dependent); rack mount adapters; flexible antenna

 

Availability: In Stock
Current Stock:
Width: 1.00
Height: 1.00
Depth: 1.00
GTIN: 736021163621
MPN: Audio Technica M3L Wireless In-Ear Monitor System
SKU: 60317

Customer Reviews 0 (0 Reviews) Write a review of this product