Loading... Please wait...
Black Friday Weekend Sale

Categories

Add to Wish List

Click the button below to add the Crown XLS 1000 Professional Stereo Power Amplifier with DSP to your wish list.

Crown XLS 1000 Professional Stereo Power Amplifier with DSP

  • Crown XLS 1000
RRP:
$499.00
Your Price:
$299.00 (You save $200.00)
SKU:
63234
Brand:
Availability:
In Stock
Quantity:
Google+


Product Description

Crown has always made fantastic amplifiers. Although the Crown XLS amplifiers are very affordable, they are still built rock-solid ready to supply you with years of reliable service. The crown XLS 1000 power amplifier packs sufficient punch to handle most 15 inch full range loudspeakers. With 215 watts per channel at 8 ohms, the crown XLS 1000 is a perfect fit for most small to medium sized DJ systems. In addition, the XLS 1000 amplifier can be used successfully in small to medium-sized entertainment venues.Getting signal into the XLS 1000 is easy, you have your choice of XLR, 1/4 inch, or RCA inputs. You also have a choice of outputs, including two and four pole speakon connectors, as well as binding posts. To add even more value to this amplifier, Crown outfitted the XLS 1000 with an impressive set of DSP features. No other power amplifier in this price range offers you so much reliability, as well as fantastic DSP functionality. Oh yeah, I almost forgot, the XLS 1000 power amplifier only weighs in at 8 pounds!Every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value!

Features

  • High performance, lightweight Class-D amplifier  weighs less than 11 lbs.
  • Integrated PureBandCrossover System ensures seamless transitions from low- to high-frequency drivers
  • Integrated PeakxLimiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA Inputs ensure compatibility with any source
  • 1/4" Inputs can be used as loop-thrus to distribute signal to additional amplifiers

Rated Power Output

  • 2ohm Dual (per channel): 550W
  • 4ohm Dual (per channel): 350W
  • 8ohm Dual (per channel): 215W
  • 8ohm Bridge: 700W
  • 4ohm Bridge-Mono: 1,100W

Performance

  • Sensitivity: (for full rated power at 4 ohms): 1.4 Vrms.
  • Frequency Response: (at 1 watt, 20 Hz to 20 kHz): +0 dB, 1 dB.
  • Signal-to-Noise Ratio: XLS 1000 > 97 dB XLS 1500, XLS 2000, XLS 2500 > 103 dB
  • Total Harmonic Distortion (THD): < 0.5%.
  • Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 30 dB: < 0.3%.
  • Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
  • Crosstalk (below rated 8 ohm power): At 1kHz: > 85dB, At 20kHz: >55dB
  • Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
  • Load Impedance: 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
  • AC Line Voltage and Frequency Configurations Available (-+10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240 VAC 50 Hz.

Controls

  • Level: Two front-panel rotary level controls, one for each channel.
  • LCD Screen: Back-lit LCD allows for crossover configuration, amp mode configuration and clip compressor configuration. Menu/Prev/Next: Three buttons located near the LCD screen that are used to configure and access the integrated processing.
  • Power: Front-panel switch; on when in the IN position. Blue LED will illuminate when on.
  • Circuit Breaker: Back-panel breaker provides overload protection.

Integrated Processing

  • PureBand Crossover System
  • Crossover Filter: Linkwitz-Riley 24dB per octave
  • Crossover Frequency Range: 50 Hz - 3 kHz
  • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), Low Pass (both channels LPF), High Pass (both channels HPF), Bridge (LPF or HPF)
  • Peak Limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers

Indicators

  • Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel's input signal exceeds 40 dBu.
  • 10 Indicator: Green LED flashes when output signal exceeds10 dB below clip.20 Indicator: Green LED flashes when output signal level exceeds20 dB below clip.
  • Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel's output is being overdriven.
  • Thermal Indicator: Two red LEDs, one for each channel, illuminate when thermal compression begins.

Input/Output

  • Input Connectors: XLR (one per channel), 1/4 inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
  • Output Connectors: Two 4-Pole Speakon Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridge mono wiring or for stereo wiring of two speakers to a single Speakon connector.
  • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)

Protection

  • XLS Series amplifiers provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and thermal protection.

Construction

  • XLS 1000/XLS 1500: 8.12-Inch (20.62cm) depth
  • XLS 2000/XLS 2500: 10.35-Inch (26.29cm) depth
  • Ventilation: Flow-through ventilation from front to back.
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
  • Weight: 8.6 lb (3.9 kg)

 


Find Similar Products by Tag


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Our Newsletter